Filter Solutions Technologies, LLC ®
** Manufacturer of Ultra Efficient-High Performance "FUEL" Filtration for all fuels in: Automotive - Marine - Ag-Eco - Racing - Performance **
Click on the "Filter Systems" tab above for all of our systems
Check out our NEW products (Click on the product or New tab above) :
Fuel Filtering & Filters: Why FST ?
Filtering; In the past, because you could get away with poor fuel filtering when running a carburetor, all you needed was flow. So, performance fuel filters were kept small and "opened-up", thus sacrificing filtering efficiency to get fuel flow by using high micron rated media (filter elements) because they had a small filter surface area. A good one "might" provide 10 microns of filtering efficiency with 60 sq. in. of surface area.
Water / Ethanol; Also in prior years, ethanol and water in the fuel was not as prevalent as it is today. Even some high-octane, high performance and racing fuels are having water and ethanol contamination problems. (Competitors') stainless steel screen filters do nothing to stop water and older paper filters would swell up if you ran ethanol, alcohol or methanol because they were water blocking (would absorb water) not shed it.
Filtering; FST uses a much larger surface area media (filter elements). Even our smallest filter has 122 sq. in. of media and our largest has 579 sq. in.! With this larger surface area, FST uses two different micron rated filter medias: 4 micron in our smaller RF500 & RF700 filters, and 3 micron FloMax™ filtering media in our larger RF500M & RF900D filters. As a result FST can filter down to 3 or 4 microns of contamination (2.5 to 3.3 times better than the competitors) and still flow 300-350 gph!
Water / Ethanol; The FST FloMax™ 3 & 4 micron filtering media mentioned above also separates and sheds any and all water on contact with the filter media. No, it can't separate the ethanol, but ethanol attracts water so a water separating filter media is a must to optimize filtering efficiency. Older water "blocking" filter media would swell up and block fuel flow, not FloMax™, it sheds, not blocks!
With today's high-performance fuel injection, FST fuel filters are the answer to the problem of improper injector operation and efficiency.
Another problem (and FST solution) pertains to diesel fuel during engine operation in cold weather. All of the same problems (and solutions) discussed above hold true with diesel. In addition, one more problem exist in cold climates. Even during operation of the vehicle (driving), cold fuel can gell or wax (cover the surface of the filter element), sometimes even stopping fuel flow and preventing operation of the engine.
Solution: FST's TurboFyner™ fuel refining filter system (#RPM900) filters down to 3 micron, separates water and heats the fuel while driving. Go to the "Filter Systems" tab above and click on RPM900 for complete information about this revolutionary fuel filtering system that is especially a must when using biodiesel or vegetable oil fuels.
With all of the changes in today's fuel(s) and fuel injection, the one thing that is more important than ever before, and has been the one missing piece in the street-performance & racing markets, is a fuel filter that really filters the fuel and separates water, yet with the flow needed for today's performance/racing engines. Most of our fuel filter competitors compromise filtration for flow. Due to the large square inch capacity of media, FST's FloMax™ maximum flow (300-350 GPH) and highly efficient 4 and 3 micron filtration and water separation make the FST line the most innovative and efficient system ever developed. Stainless steel screen fuel filters (like most competitors) do nothing to shed/stop water and may only filter down to 10 micron. In fact, several fuel injector manufacturers & rebuilders use FST 3 micron fuel filters on their equipment because of FloMax™ efficiency and flow rates.
From desert to ocean & everything in between; if you need fuel filtering; it's Filter Solutions Technologies®
Applications: Racing / Agriculture / Street Rods / Off-Road / Street Performance / Work Truck-Fleets / Bio-Diesel / Marine: pleasure boats and (high HP) Off-shore marine racing. FST Performance® / FST Marine / FST Ag-Eco
We do not build carburetors, fuel injection systems or fuel pumps We just build the most efficient high performance FUEL FILTERS available. FST = "Takes the CRAP out of your fuel"™
All housings are manufactured from solid billet 6061-T6 aluminum - absolutely no castings - and are lightweight and extremely compact for use in gasoline, racing fuels, ethanol, and methanol applications with the FloMax™ systems and diesel & biodiesel with the TurboFyner™ system.
The easily replaceable spin-on filters are totally self-contained, requiring no messy and questionable canister cleaning, eliminates cartridge style filter back-flushing and totally eliminates any chance of fuel system contamination. With the spin-on style filter sealing system, there are no housing seals or gaskets to dig out and no gaskets, o-rings or seals to leak or swell.
Red, Black, Clear, and Purple anodized finishes
300 GPH Fuel Flow is due to the large square inch media area - will handle engines through 2,000 HP
Solid Billet 6061-T6 Aluminum base/manifold - No casting porosity, cracking, leaking, or air intrusion
Stainless steel filter adaptors
Filters down to 4 and 3 Micron - Exclusive FloMax™ fuel / water separating filter media
Our FloMax™ filter media separates and strips water to settle in the quiet zone of the filter, not blocking the filtering media as some water-blocking competitors do.
Ultra low restriction - again due to the 122 to 579 square inches of filter media surface, FST outperforms the competition in filtering
FloMax™ series = Gasoline - Racing fuels - Ethanol - Methanol compatible
TurboFyner™ = Petroleum Diesel - Biodiesel - Vegetable Oil
Exclusive EZ-MOUNT™ base/manifold allows easy mounting on tube chassis or surface mount with 7/16" mounting holes
Multiport Fuel ports - allows for easy fuel line routing and the ability to add accessories like pressure gauges, etc
Systems can be installed on either the pressure or suction side of the fuel pump system
Click on the "Filter Systems" button at the top of the page to view our systems.
** Designed & owned in America - Sold & shipped throughout the world - All systems and filters are manufactured with the best materials from various countries, then hand assembled, and hand inspected, proudly in the U.S.A.**
We appreciate and "Thank You" for your business!
Don't forget to "Like" us at: facebook/fstperformance
Home of the FloMax™ fuel filters & systems. Formerly RAMCO Performance Manufacturing: Now a division of ROLLINS Performance Manufacturing, Filter Solutions Technologies' filtration systems represent a significant advancement in water-stripping technology and provides the highest in filtration efficiency. All of the FloMax™ filters were designed for gasoline, ethanol & methanol based gasolines & racing fuels. The TurboFyner™ diesel systems were designed for petroleum diesel, vegetable oil & biodiesel filtering. (hover over the above "Filter Systems" tab for information on each individual system)